Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 5236 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Safeguard 6.10 client synchronization schedule

the_adrick

We are rolling out encryption to all of our staff. Our current method is to push the installation to all the machines and allow them to sync to the server to pull the client configuration.

We were wondering what the default time frame is for the client to attempt to contact the server?

It looks like we can manually double client the icon in the tool abr to foce a sync but we're hoping that we can get the process to work without any manual intervention from the IT staff.

:54821


This thread was automatically locked due to age.
Parents
  • 0

    The deafult is 90 minutes however there is a +/- 50% range where the client will synchronise to prevent every client from synchronising at the same time and slowing the network down. So using the deafult it will synchronise between 45 to 135 minutes after the last synch.

    It can be changed in the Safeguard Management center by creating a General Settings Policy and changing the "Transfer Rate: Connection internal to server (min)" value to the interval you want.

    The only concern I have with your plan is that without the client configuration how will the client know which server to synchronise to? Unless I am missing something?

    :54874
Reply
  • 0

    The deafult is 90 minutes however there is a +/- 50% range where the client will synchronise to prevent every client from synchronising at the same time and slowing the network down. So using the deafult it will synchronise between 45 to 135 minutes after the last synch.

    It can be changed in the Safeguard Management center by creating a General Settings Policy and changing the "Transfer Rate: Connection internal to server (min)" value to the interval you want.

    The only concern I have with your plan is that without the client configuration how will the client know which server to synchronise to? Unless I am missing something?

    :54874
Children
No Data
Unfiltered HTML