Thread Info
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 25590 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cyberoam Reset

Joshua Ajediti

I just reset my cyberoam and I could no longer access it again. The device is not accepting admin as password in CLI mode. it is giving Authentication fail.



This thread was automatically locked due to age.
Parents

  • Hi,


    Good day!

     

    You may reset the password on CRLoader by using Console cable.

     

    1. Reboot the device.

    2. On CLI, press enter continuously until option for CRLoader appear and its always option 0.

    3. Go to Troubleshooting button.

    4. Reset to default password.

    5. The reboot the device.

     

    Warm Regards,

    Deo

    Deo Angelo P. Lim | Technical Manager - Philippines

    Sophos Certified Architect | Sophos Certified Sales Consultant | Cyberoam Certified Network Security Professional

    ARMLINK COMPUTER CENTER

    M +63 917 720 2755

    E deo@armlinkccs.com

    Skype: deoangelo.lim

  • in reply to Deo Angelo Lim

    Confirmed working!  

     

    Timing is a bit tricky, wait until immediately after the POST beep on the Cyberoam to try continuous Enter key press.

     

    I had to do this after importing configuration and selecting "Overwrite"

    Note to all: If importing only selective exported configuration, use "Preserve" option.

    If not a full export, it seemingly overwrites all other config with "null" values.

    Hence the need for a full recover / reset procedure. 

     

    Thanks

Reply
  • in reply to Deo Angelo Lim

    Confirmed working!  

     

    Timing is a bit tricky, wait until immediately after the POST beep on the Cyberoam to try continuous Enter key press.

     

    I had to do this after importing configuration and selecting "Overwrite"

    Note to all: If importing only selective exported configuration, use "Preserve" option.

    If not a full export, it seemingly overwrites all other config with "null" values.

    Hence the need for a full recover / reset procedure. 

     

    Thanks

Children
Unfiltered HTML