Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 6697 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos shield

plagemala

I have two queries with Sophos.  First, despite setting it all correctly, and checking the box, it does NOT automatically update on start-up.  I have to do it manually.

Secondly, when Sophos is updating, the little green "wiggles" do NOT appear in the shield on the screen edge bar.  How do I make this happen?

:10977


This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    Since version 9, the shield icon no longer animates to indicate that an update is taking place.  I assume these are the wiggles you refer to?

    The first update used to happen a short while after the AutoUpdate service started (alsvc.exe), either 30 seconds or a minute, I can't remember off the top of my head.  This also was extended to 5 minutes but can be changed with the reg key:

    HKLM\SOFTWARE\Sophos\AutoUpdate\StartupDelay
    where StartupDelay should be a DWORD value, which sets the number of seconds before the service starts an update.
    E.g.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\AutoUpdate]
    "StartupDelay"=dword:0000000a
    Would be a 10 seconds delay in checking for an update after the Sophos AutoUpdate Service starts.

    To test this delay, if you restart the AutoUpdate service, you should see alsvc.exe spawn alupdate.exe in task manager.  The Alupdate.exe process is evidence of an update check/update taking place.

    Regards,

    Jak

    :10999
Reply
  • 0

    Hi,

    Since version 9, the shield icon no longer animates to indicate that an update is taking place.  I assume these are the wiggles you refer to?

    The first update used to happen a short while after the AutoUpdate service started (alsvc.exe), either 30 seconds or a minute, I can't remember off the top of my head.  This also was extended to 5 minutes but can be changed with the reg key:

    HKLM\SOFTWARE\Sophos\AutoUpdate\StartupDelay
    where StartupDelay should be a DWORD value, which sets the number of seconds before the service starts an update.
    E.g.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\AutoUpdate]
    "StartupDelay"=dword:0000000a
    Would be a 10 seconds delay in checking for an update after the Sophos AutoUpdate Service starts.

    To test this delay, if you restart the AutoUpdate service, you should see alsvc.exe spawn alupdate.exe in task manager.  The Alupdate.exe process is evidence of an update check/update taking place.

    Regards,

    Jak

    :10999
Children
No Data
Unfiltered HTML